These ‘Equipment Maintenance’ posts are intended to show how to service and perform basic maintenance of different VJ Tech equipment used for consolidation testing. This post describes how to remove, check and replace the battery on a PCB. This may be when the battery has failed or following a prolonged period where the instrument has been switched off in humid conditions and will not power up.

These 'Equipment Maintenance' posts are intended to show how to service and perform basic maintenance of different VJ Tech equipment. This post describes how to attach the ACONS earth lead should it prove necessary and how to adjust the screen contrast on the ACONS and other various VJ Tech Instruments. This may be necessary if the screen is too bright or too dark.

It is important to carry out regular maintenance checks on your equipment to ensure you avoid any malfunctions or failures. In the event of a malfunction it is necessary to check if the TS50 Motor is functioning correctly.

It is crucial that regular checks and maintenance is carried out on your testing equipment to ensure the equipment performs to its highest standard. This includes TriSCAN Seal set update along with routine power supply checks.