This blog explains how to Calibrate a Pressure Transducer for a DSC2000
This blog explains how to calibrate a Load Cell for a DSC2000.
This blog describes the process of Calibration for a Displacement Transducer on a DSC2000.
These ‘Using Clisp Studio’ posts are intended to highlight facilities in Clisp Studio that the User may not be aware of, or general facilities to help your dynamic testing run smoothly.
Clisp Studio Software has been developed to perform quickly and efficiently in the most demanding geotechnical laboratories. At VJ Tech, all of the Clisp Studio modules have a simple and quick installation process along with a test assistant to take the user through everything from set up to results.