Dynamic Triaxial Testing System with Balance Ram

For prices: call +44 (0)118 945 3737 or Email us

This System is capable of providing fully automatic Dynamic Triaxial testing, and consists of the following;

A 100 kN BASIC frame fitted with a 10 Hz/20 kN electro-mechanical actuator,
Single Axis 3-Phase Dynamic Servo Controller (DSC3003M) for actuator control
DSC3003M also used to log Load, Displacement and Pore Water Pressure
Pro Dual Hydraulic Automatic Pressure Controller for Cell and Back Pressure control
No Pneumatic APC required for Cell Pressure control due to the design of our Balance Ram
150 mm (6") Dynamic Triaxial Cell
Pro APC has 7" Touchscreen for standalone input if required

Features:

Dynamic (cyclic) testing
+/-20 kN (4496 lbf), 0 - 10 Hz electro-mechanical actuator mounted to crossbeam
Maximum displacement 100 mm (4")
Maximum dynamic load 20 kN (4496 lbf)
Maximum Frequency 10 Hz
Minimum Frequency 0.0001 Hz
Sliding rails for Dynamic Triaxial Cell for ease of sample assembly
3-Phase DSC3000M with Encoder and Load Channel included
Additional Channel Cards as required (e.g. Displacement, PWP, On-Sample Transducers)
Balance Ram used to keep Cell Pressure constant so pneumatic APC not required
Dual APC for controlling and monitoring both Cell and Back Pressure
Full control from PC (running Clisp Studio) over a network via the DSC

Detailed product specifications