Dynamic Triaxial Testing System (TriSCAN Pro 50kN (11240 lbf) Frame)

Dynamic (Cyclic) Triaxial Test System (TriSCAN Pro 50 kN (11240 lbf) Frame

For prices: call +44 (0)118 945 3737 or Email us

This System is capable of providing fully automatic Dynamic Triaxial testing, and consists of the following;

A TriSCAN Pro 50 kN frame fitted with a 5 Hz/5 kN electro-mechanical actuator
Single Axis Dynamic Servo Controller (DSC3000M) for actuator control
DSC3000M also used to log Load, Displacement and Pore Water Pressure
TriSCAN Pro Load frame is also capable of Static Testing
Pro Pneumatic APC to control Cell Pressure (using an Air/Water Interface Cylinder)
Pro Hydraulic Automatic Pressure Controller for Back Pressure control
50 mm (2") Dynamic Triaxial Cell
Pro APCs have 7" Touchscreen for standalone input if required
Easy test setup, control and results viewing & output with our csDYNA software

Features
Specifications
Related Products
Videos

Dynamic Triaxial Testing System (TriSCAN Pro 50kN (11240 lbf) Frame)

Available Configuration Possibilities:

Note: This table summarises ALL available options - obviously some combinations are incompatible. The User can select the most suitable configuration for the testing requirements and contact VJ Tech for additional advice on the optimum System setup.

Dynamic TriSCAN Pro Frame	50 kN (11240 lbf)
Dynamic Servo Controller	DSC3000M
Back Pressure Hydraulic APC	3500 kPa (508 psi)
Cell Pressure Pneumatic APC	1000 (145 psi)
Triaxial Cell Sizes	50, 75, or 100 (2, 3 or 4 inch)
Sample Sizes	35, 38, 50, 70 or 100 mm (1.38, 1.5, 2, 2.75 or 4 inches)
Load Cells	2.5, 5 or 10 kN (562, 1124, 2248)
Displacement Transducers	10 or 25 mm (0.4 or 1 inch)
PWP Transducers	10 or 20 bar (145 or 290 psi)
Water Distribution Panel	2-way, 4-way, 6-way or 8-way
Software	Clisp Studio csDYNA module

Detailed product specifications

Maximum Frequency	5.0000 Hz
Minimum Frequency	0.0001 Hz
Maximum Dynamic Load	+/-5 kN (1124 lbf)
Maximum Static Load	100 kN
Maximum Displacement	70 mm
Waveforms	Sinusoidal, Square, Triangular, Haversine, Saw Tooth, Inverted Saw Tooth, Rectangular, User Defined
Data Logging Rate	4000 control points per cycle OR 500 popints per second
Sample Size	38-100 mm (1.5 to 4 inch) (dependent on Cell size)
PC Interface	Ethernet or USB