Building better technology
for the civil engineering industry

Building better technology
for the civil engineering industry

Tel: +44 (0)118 945 3737

Tel: +44 (0)118 945 3737

VJTech Limited Mobile Logo

signin Login register Register Tel: +44 (0)118 945 3737

Back

Dynamic (Cyclic) Triaxial Testing System (TriSCAN Pro 50kN (11240 lbf) Frame)


Dynamic (Cyclic) Triaxial Testing System (TriSCAN Pro 50 kN (11240 lbf) Frame)

For prices: call +44 (0)118 945 3737 or Email us
The VJ Tech Dynamic (Cyclic) Triaxial Testing System (using a TriSCAN 50 kN Frame & 5 Hz/ 5kN acuator) is capable of providing fully automatic dynamic (cyclic) Triaxial testing using a high speed Dynamic Servo Controller.

This example System Setup uses a TriSCAN 50 kN Frame fitted with a 5 Hz/ 5kN actuator and a 50 mm (2 inch) Triaxial Cell. The DSC3000M is used for the electro-mechanical actuator control and also measurement of Load, Displacement and PWP. A Pro pneumatic APC is used to control Cell Pressure (using an Air/Water Interface Cylinder), and a Pro hydraulic APC is used for Back Pressure control.

The system is controlled using the csDYNA module of our renowned user friendly Clisp Studio software suite. This enables you to setup, monitor and control the Test, and then output the results in Excel format for further manipulation if required. The software conforms to ASTM3999 & ASTM5311.

Dynamic (Cyclic) Triaxial Testing System (TriSCAN Pro 50kN (11240 lbf) Frame)

Available Configuration Possibilities:

 

Note: This table summarises ALL available options - obviously some combinations are incompatible. The User can select the most suitable configuration for the testing requirements and contact VJ Tech for additional advice on the optimum System setup.

Dynamic TriSCAN Pro Frame
50 kN (11240 lbf)
Dynamic Servo Controller
DSC3000M
Automatic Pressure Controllers     1000 or 3000 kPa (145 or 435 psi)
Triaxial Cell Sizes 50, 75, or 100 (2, 3 or 4 inch)
Sample Sizes  35, 38, 50, 70 or 100 mm (1.38, 1.5, 2, 2.75 or 4 inches)
Load Cells 2.5, 5 or 10 kN (562, 1124, 2248)
Displacement Transducers 10 or 25 mm (0.4 or 1 inch)
PWP Transducers 10 or 20 bar (145 or 290 psi)
Water Distribution Panel 2-way, 4-way, 6-way or 8-way 
Software Clisp Studio csDYNA module

Detailed product specifications

Maximum Frequency    
5.00 Hz
Maximum Dynamic Load      
+/-5 kN (1124 lbf)
Maximum Displacement
70 mm
Waveforms Sinusoidal, Square, Triangular, Haversine, Saw Tooth, Inverted Saw Tooth, Rectangular, User Defined
Data Logging Rate 1000 control points per cycle
Sample Size  38-100 mm (1.5 to 4 inch) (dependent on Cell size) 
PC Interface  Ethernet or USB

Product Documentation

Pro Dynamic Triaxial Testing Systems Datasheet
Download

Accessorize your purchase with these related items

Clisp Studio Dynamic Triaxial Software Module
Clisp Studio Dynamic Triaxial Software Module
TriSCAN Pro 50 kN (11240 lbf) Frame with 5 Hz/ 5 kN Actuator
TriSCAN Pro 50 kN (11240 lbf) Frame with 5 Hz/ 5 kN Actuator
DSC3000M - Single Axis Dynamic Servo Controller (Mechanical)
DSC3000M - Single Axis Dynamic Servo Controller (Mechanical)
Pro Automatic Pressure Controller 1000 kPa (145 psi)
Pro Automatic Pressure Controller 1000 kPa (145 psi)
Pro Pneumatic APC (Single Channel) 1 MPa
Pro Pneumatic APC (Single Channel) 1 MPa
Air/Water Cylinder (1000 kPa)
Air/Water Cylinder (1000 kPa)
Dynamic (Cyclic) Triaxial Cell (75 mm (3"))
Dynamic (Cyclic) Triaxial Cell (75 mm (3"))
De-airing Block with Valve for Pressure Transducer
De-airing Block with Valve for Pressure Transducer
Automatic Solenoid Valve with Quick Release Connection
Automatic Solenoid Valve with Quick Release Connection
Dynamic Internal Submersible Load Cells with 25mm Diameter Ram
Dynamic Internal Submersible Load Cells with 25mm Diameter Ram

No Videos currently available for this product