Ring Shear Pro Frame with Stand & Touchscreen Input

Ring Shear Pro Testing System (with Load Cells)

Part Number : VJT5600A-P

For prices: call +44 (0)118 945 3737 or Email us

Note: The displayed image shows the basic VJT Product with some additional accessories

The VJ Tech Ring Shear Pro is a Bromhead style torsional shear device, which produces accurate and repeatable test results to determine the residual shear strength of cohesive soils. It comes with a sintered bronze Top Cap as standard, but can also be fitted with a Steel Top Cap of known roughness, for use in the Soil-Steel Interface Test with our Advanced csRING-SSI software module.

Applies continuous rotational shear displacement to the sample using a stepper motor. Rotational Shear is measured using a pair of Load Cells (or Load Rings if required (Junction Box needed))

Lever loading actuation of Normal Stress via dead weights

Features
Specifications
Videos

Ring Shear Pro Frame with Stand & Touchscreen Input

Features:

Conforms to BS1377-7, BS EN ISO 17892-10: 2018 & ASTM D6467-13
Bromhead style design
Can be fitted with Load Cells (or Load Rings if required)
USB or Ethernet Interface for computer control
Integrated 7" Touchscreen Display for standalone control
Test setup and control facilities
On-board data logging with large data storage (up to 14 million records) on internal SD card (8Gb standard)
Data export via USB link for manipulation within Excel
High speed ARM processor
High speed sensor data conversion (24 bit, up to 4000 samples/sec)
Built-in live data table and graphs
Built-in auto protection for sensor limits
Non-volatile Memeory for sensitive data
Top cap assembly available for soil-steel interface testing

Detailed product specifications

Sample Size	100 mm (4 inches) (outside diameter) x 70 mm (2.75 inches) (inside diameter) x 5 mm (0.2 inches) thick
Load Measurement	2 x 1 kN (225 lbf) Load Cells (or 2 x 1 kN (225 lbf) Load Rings (each with DDG)
Maximum Normal Stress ;	1000 kPa
Maximum Shear Stress ;	750 kPa
Dimensions (W x D x H)	1340 mm x 380 mm x 1400 mm
Electrical Requirement	90 - 240 Volts, 50/60 Hz, Single Phase
Software	Clisp Studio csRING

No Videos currently available for this product

Previous Storefront

Back