Unconfined Compressive Strength Testing System
For prices: call +44 (0)118 945 3737 or Email us
The Unconfined Compressive Strength Testing System is designed to apply a steadily increasing axial compression to a cylindrical specimen of cohesive soil or soft rock until failure occurs.
A VJ Tech Advanced TriSCAN Pro Load Frame (or a Triplex Advanced Frame (50 kN (11240 lbf) only)) is used to apply the compressive force (measured with a Load Cell) with the axial compression measured using an LSCT Displacement transducer.
The test provides an immediate approximate value of the compressive strength of the specimen.
Young’s Modulus and the Poisson ratio can be calculated when using On-Sample strain gauges or transducers with our csTriaxAdv software.
The Test is controlled from a PC running our Clisp Studio software, with easy Test setup, control and monitoring and results analysis.
Unconfined Compressive Strength Testing System Available Configuration Possibilities:
Note: This table summarises ALL available options - obviously some combinations are incompatible. The User can select the most suitable configuration for the testing requirements and contact VJ Tech for additional advice on the optimum System setup.
|Advanced Triscan Pro Frames
||10, 50 or 100 kN ((2248, 11240 or 22481 lbf)) capacity with inbuilt datalogging
||35, 38, 50, 70, 100 or 150 mm (1.38, 1.5, 2, 2.75, 4 or 6 inches)
||2.5, 5,10, 20, 50, or 100 kN (562, 1124, 2248, 4496, 11240 or 22481 lbf)
||10, 25 and 50 mm (0.4, 1 and 2 inches)
||One for Triscan frame
||Clisp Studio csTRIAX
No Videos currently available for this product