Dynamic Triaxial Testing System with BASIC 5Hz/5kN Load Frame

Dynamic (Cyclic) Triaxial Testing System (BASIC Frame)

For prices: call +44 (0)118 945 3737 or Email us

This System is capable of providing fully automatic Dynamic Triaxial testing, and consists of the following;

A 50 kN BASIC frame fitted with a 5 Hz/5 kN electro-mechanical actuator,
Single Axis Dynamic Servo Controller (DSC3000M) for actuator control
DSC3000M also used to log Load, Displacement and Pore Water Pressure
Pro Pneumatic APC to control Cell Pressure (using an Air/Water Interface Cylinder)
Pro Hydraulic Automatic Pressure Controller for Back Pressure control
50 mm (2") Dynamic Triaxial Cell
Pro APCs have 7" Touchscreen for standalone input if required
Easy test setup, control and results viewing & output with our csDYNA software

Features
Specifications
Related Products
Videos

Dynamic Triaxial Testing System with BASIC 5Hz/5kN Load Frame

Available Configuration Possibilities:

Note: This table summarises ALL available options - obviously some combinations are incompatible. The User can select the most suitable configuration for the testing requirements and contact VJ Tech for additional advice on the optimum System setup.

Dynamic Basic Frame	Fitted with 5 Hz/ 5kN actuator
Dynamic Servo Controller	DSC3000M
Automatic Pressure Controllers	1000 or 3500 kPa (145 or 508 psi)
Triaxial Cell Sizes	50, 75, or 100 (2, 3 or 4 inch)
Sample Sizes	35, 38, 50, 70 or 100 mm (1.38, 1.5, 2, 2.75 or 4 inches)
Load Cells	2.5, 5 or 10 kN (562, 1124, 2248)
Displacement Transducers	10 or 25 mm (0.4 or 1 inch)
PWP Transducers	10, 20 or 30 bar (145, 290 or 435 psi)
Water Distribution Panel	2-way, 4-way, 6-way or 8-way
Software	Clisp Studio csDYNA module

Detailed product specifications

Maximum Frequency	5.0000 Hz
Minimum Frequency	0.0001 Hz
Maximum Dynamic Load	+/-5 kN (1124 lbf)
Maximum Displacement	70 mm
Waveforms	Sinusoidal, Square, Triangular, Haversine, Saw Tooth, Inverted Saw Tooth, Rectangular, User Defined
Data Logging Rate	4000 control points per cycle OR 500 points per second
Sample Size	38-100 mm (1.5 to 4 inch) (dependent on Cell size)
PC Interface	Ethernet or USB