Back

Unconfined Compressive Strength Testing System

The Unconfined Compressive Strength Testing System is designed to apply a steadily increasing axial compression to a cylindrical specimen of cohesive soil or soft rock until failure occurs. A VJ Tech Advanced TriSCAN Pro Load Frame (or a Triplex Advanced Frame (50 kN (11240 lbf) only)) is used to apply the compressive force (measured with a Load Cell) and the axial compression is measured with an LSCT Displacement transducer. The test provides an immediate approximate value of the compressive strength of the specimen and Young’s Modulus and the Poisson ratio can be calculated when using on sample strain gauges or transducers. The software conforms to BS1377:1990 & ASTM D2166/D2166M-13.

For prices: call +44 (0)118 945 3737 or Email us

Features
Documentation
Related Products
Videos

Unconfined Compressive Strength Testing System

Available Configuration Possibilities:

Note: This table summarises ALL available options - obviously some combinations are incompatible. The User can select the most suitable configuration for the testing requirements and contact VJ Tech for additional advice on the optimum System setup.

Advanced Triscan Pro Frames	10, 50 or 100 kN ((2248, 11240 or 22481 lbf)) capacity with inbuilt datalogging
Advanced Triplex II	50 kN (11240 lbf) capacity with inbuilt datalogging
Sample Sizes	35, 38, 50, 70, 100 or 150 mm (1.38, 1.5, 2, 2.75, 4 or 6 inches)
Load Cells	2.5, 5,10, 20, 50, or 100 kN (562, 1124, 2248, 4496, 11240 or 22481 lbf)
Displacement Transducers	10, 25 and 50 mm (0.4, 1 and 2 inches)
Support Stands	One for Triscan frame
Software	Clisp Studio csTRIAX