Semi-Automatic Air/Water Pressure Triaxial Testing System

For prices: call +44 (0)118 945 3737 or Email us

VJ Tech's Semi-Automatic Air/Water Pressure Triaxial Testing System provides a low cost, effective solution to laboratory Triaxial testing. It consists of:

A 50 kN (11240 lbf) TriPLEX load frame with built-in data logging for measuring;

Load,
Displacement,
Pore Water Pressure,
Volume Change,

Two air/water cylinders using compressed air to provide the Cell and Back water pressure to the Triaxial Cell containing the sample
An Automatic Volume Change device to measure Volume Change
Connection to PC using RS232

Features
Specifications
Related Products
Videos

Semi-Automatic Air/Water Pressure Triaxial Testing System

Available Configuration Possibilities:

Note: This table summarises ALL available options - obviously some combinations are incompatible. The User can select the most suitable configuration for the testing requirements and contact VJ Tech for additional advice on the optimum System setup.

Advanced TripPLEX Frame	50 kN capacity
Air/Water Cylinder	10 bar (145 psi)
Automatic Volume Change Device	Unlimited Capacity
Triaxial Cell Sizes	50 mm (2 inch)
Sample Sizes	35, 38 or 50 mm (1.38, 1.5, 2 inch)
Load Cells	2.5, 5,10 kN (562, 1124, 2248 lbf)
Displacement Transducers	25 and 50 mm (1 and 2 inch)
PWP Transducers	10 bar (145 psi)
Water Distribution Panel	2-way
Software	Clisp Studio csTRIAX module

Detailed product specifications

Advanced TriPLEX 50 kN Frame	50 kN capacity
Air/Water Cylinders(2)	10 bar (145 psi) for Cell and Back Pressure control
Automatic Volume Change Device	With PT transducer for Volume Change measurement
Triaxial Cell 75mm	Base Pedestal and Top Cap for 70mm sample
Transducers	S-Beam Load Cell (10 kN (2248 lbf)), PT Displacement (50 mm (2 inch)) & PWP (10 bar (145 psi))
Water Distribution Panel	Water Distribution Panel (2-Way)
Software	Clisp Studio csTRIAX module