Building better technology
for the civil engineering industry

Building better technology
for the civil engineering industry

Tel: +44 (0)118 945 3737

Tel: +44 (0)118 945 3737

VJTech Limited Mobile Logo

 Login  Register Tel: +44 (0)118 945 3737

 
     
VJ Tech Limited - Blog
LucindaB

Using Clisp Studio Part 5 - DAC Linearisation

May 30 2014
11
0

These ‘Using Clisp Studio’ posts are intended to highlight facilities in Clisp Studio that the User may not be aware of, or general facilities to help your dynamic testing run smoothly.

The Benefits of Automated Dynamic Testing

May 30 2014
64
0

Dynamic Testing (both Triaxial and Shear) is a relatively new area of soil testing which requires considerable computing power due to the amount of data produced. Some years ago, this required a large amount of equipment – but the improvements in computing power and VJ Tech technological and software advancement have made Dynamic testing (Cyclic) more efficient and affordable for the laboratory.

Consolidation Testing - Equipment Maintenance Part 5 - Replacing the PCB Board Rechargeable Battery

May 30 2014
14
0

These ‘Equipment Maintenance’ posts are intended to show how to service and perform basic maintenance of different VJ Tech equipment used for consolidation testing. This post describes how to remove, check and replace the battery on a PCB. This may be when the battery has failed or following a prolonged period where the instrument has been switched off in humid conditions and will not power up.

Soil Testing - Automatic Consolidation Testing Part 2

May 30 2014
83
0

Consolidation Testing Part 1 described the initial setup for a Consolidation Test involving the System Setup and Test Creation using an Automatic CONSolidation (ACONS) Instrument. Consolidation Testing Part 2 will deal with the Test Execution and Results.

Using Clisp Studio part 4

May 02 2014
9
0

These ‘Using Clisp Studio’ posts are intended to highlight facilities in Clisp Studio that the User may not be aware of, or general facilities to help testing run smoothly.

The Benefits of Automated CBR Testing

May 01 2014
92
0

The California Bearing Ratio (CBR Test) is a penetration test for evaluating the load-bearing capacity of soils used for building roads and other hardened surfaces. The traditional method of for a CBR Test involved penetrating a plunger of fixed diameter into a soil sample using a Load Frame (usually controlled by some mechanical device) with a Load Ring for measuring Vertical Load and the Displacement measured using Mechanical Dial Gauges. This required the laboratory technician to be on hand with a clipboard and datasheet(s) to record the data when required throughout the Test.

Equipment Maintenance part 4

Apr 30 2014
10
0

These 'Equipment Maintenance' posts are intended to show how to service and perform basic maintenance of different VJ Tech equipment. This post describes how to attach the ACONS earth lead should it prove necessary and how to adjust the screen contrast on the ACONS and other various VJ Tech Instruments. This may be necessary if the screen is too bright or too dark.

Consolidation Testing Part 1 (Test Setup)

Apr 29 2014
103
0

Consolidation Testing – Part 1 will describe the initial setup for a Consolidation Test involving the system setup and test creation using an Automatic CONSolidation (ACONS) Instrument.

Using Clisp Studio - Part 3

Apr 25 2014
13
0

Welcome to part 3 of our Clisp Studio user guide. To get the best performance from our advanced software you must become familiar with all the facilities in Clisp Studio to help your testing run smoothly.


Categories


Archives

2018 Mar 2828 1
2018 Feb 587 1
2017 Oct 4668 1
2017 Aug 171 1
2016 Oct 42 1
2016 Sep 26 1
2016 Jul 6 1
2016 May 25 1
2016 Apr 25 1
2016 Mar 14 1
2016 Feb 76 3
2016 Jan 88 1
2015 Dec 27 1
2015 Nov 74 1
2015 May 132 1
2015 Mar 471 4
2015 Feb 374 1
2014 Nov 1665 8
2014 May 273 6
2014 Apr 290 7
2014 Mar 885 12
2013 Dec 105 2

Tags