VJ Tech will be awarding a prize of £1,000 to the best performing student(s) at Surrey University - Advanced Geotechnical Engineering MSc
PID settings are used in Clisp Studio in conjunction with a DSC2000 to fine tune the performance of a dynamic servo, both single (DSC2000 M) and dual axis (DSC2000 MM and HM). This support document is not designed to give a full accurate account of what PID’s are and how they are calculated.
When an installation and training package has been ordered with your VJ Tech system then the following instructions below should be undertaken before the engineer’s arrival to save time; which will ensure that the best use is made of the time available during your training sessions.
A new paper published in the journal of Soil Dynamics and Earthquake Engineering. VJ Tech in collaboration with Surrey university to design and produce an innovative cyclic loading device to simulate multiple force acting on a wind turbine.
Limited research exists regarding the resilient modulus of lime-treated expansive soils. This study investigates the effect of lime treatment on the Resilient modulus of an expansive soil from city of Tabuk in Kingdom of Saudi Arabia.
How VJ Tech automated equipment increased lab efficiency and client satisfaction for Professional Soils Laboratory (PSL, UK).
This blog highlights some of the New Features that have been added to Clisp Studio V184.108.40.2069
This blog explains how to Calibrate a Pressure Transducer for a DSC2000
This blog explains how to calibrate a Load Cell for a DSC2000.
This blog describes the process of Calibration for a Displacement Transducer on a DSC2000.